Dual Universe Creators

A fancy mining rig on S core: 4 mining units, one container L and one VR node.

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

Tired of hanging your ship in between the mining units every few days you visit your gold mine? Why not land in style on this luxury M-core landing pad? The top is flat for easy landing but below the real magic happens. On a lower deck, connected with two smaller cores your mining units will be waiting for you. Easily accessible with two ramps from the flight deck or by teleporter from the ground below. Be in absolute control as you calibrate up to 15 mining units without moving a single step, and before you leave have three Large containers at your fingertips to gather you hard earned ores. If you feel like getting your hands dirty you can use the access hatch to drop down to the bonus ores awaiting pickup. A quick elevator up will take you directly to the the flight deck, onwards to the next stop. If you are really in a hurry, all containers and Mining Units are also in reach from one area on the flight deck. The long and stable legs will make placing these cores a breeze, even on hilly ground. Instructions: Place M-core with the middle edge of the mining platform in the exact middle of three tiles. Then place the Left hand S-core, finally the Right hand S-core. If you mix up the order, it will give a nasty one voxel gap. No returns. VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

PYRAMID HONEYCOMB FACTORY: Need a lot of voxels? look no further. This factory comes equipped with 10 honeycombers set to make; Wood, Brick, Concrete, Carbon fiber, Steel, Plastic, 2 for iron and 2 for aluminum. We customize these for people a lot! Need stainless steel no problem! need calcium voxels no problem. Don't be afraid to ask for some modifications. Your personalized BPs will be put in a personalized dispenser for you upon completion. Can be customized for any T1 and T2 honeycombs for just 2 mil extra. Can also be customized for T3-T5. Just contact us for pricing! We work with you to make sure you're getting exactly what you want! ***************************************************** **********************ATTENTION******************** MORE MODELS AVAILABLE!! We now have a model that will run 10 honeycombers all the same product. Will work for all basic T1 honeycombs. Also have a 10x model for just steel one for brick and one for plastic too!! Will make voxels faster than you can place them! Cook 10 different flavors at once! READ OUR BIO FOR MORE INFO

Designed to be an entry for the NQ Build Your Legacy contest. Feature an all-in-one outpost for a good start and a safe place on heaven.

This is a one large core showroom, one big open space with viewing balcony this was made from the panel showroom kit, has small enternace and large enterance and has a flat roof for easy parking, comes with detailed panel flooring and sign space to add lettering/logo, i havnt placed any glass panels in this building as i see no point as they are totally clear now, they lost there blue tint in last update, you can get complete honeycomb kit aswell at my location for easy hassle free deployment when placing its 1 click down if your stood on another cores voxel when you deploy the blueprint, no need to do the 1 click down if your standing on the ground and the small enterance is facing you when you deploy the blueprint any other questions please dm me on discord loaded#2378

A complimentary addition to the stalwart Logistics Centre, the Mining Outpost enjoys the same style and feel, while giving you the space and comfort needed to enjoy every aspect of your environment. Located on just a Static Core S, this spacious Mining Outpost can be equipped with up to 6 Mining Units and 4 Large Containers. The Outpost also has a casual office floor with VR Pad and Screen to help you quickly see your MUs progress, your storage capacity, and your calibration needs. All in the comfort of an armchair! The construct has been designed with variable land heights in mind, allowing you to sink the foundations down by 2-3 meters, to ensure a sleek and smooth access to the building, and preventing half of it 'floating' away. Location & VR: Makashima Industries Shop ::pos{0,26,79.6509,-87.6931,99.0025}

Built in the same theme as my #1 selling L Core Factory. 3x's the room and still includes the full L core landing pad on top for easy landing. VR to: Raging Alpacas Space Factory to see it in person. Remember not to purchase in VR. Dispenser Location @ ::pos{0,0,-98774.4194,266535.3087,-27036.0767}

The God of the Sea had a close association with horses. In some myths he is the father of horses, either by spilling his seed upon a rock or by mating with a creature who then gave birth to the first horse. BP dispenser located on Alioth at - ::pos{0,2,20.3521,99.5788,18.0258} Second BP dispenser located in Space at - ::pos{0,0,-88183.9516,381273.0677,73479.7930}

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

Looking for an affordable mining platform that has plenty of space so you dont have to worry about making frequent hauling trips! Look no further. 3CS Brings you the affordable, XS Core mining platform that supports up to 4 mining units connected to 1 L container. This platform was designed with early release in mind, so many of the bells and whistles have been stripped down to just the essentials. While this version does not have the multi-container monitoring screen, this version still comes with the mining unit monitor screen for keeping tabs on the mining unit status at ease. For even easier usage, attach a pressure plate and relay to the programing board and screen to turn on/off, which will reset the PB status and show updated stats. For an even cheaper deployment, change out the honeycomb for anything you may already have in stock!

50% off blueprint price at the moment on dispenser This is a kit for the outpost landing pad as picture this kit is not for beginners its best suited for anyone that knows the fundamental of how to copy and paste and rotate etc in game, there is some over lapping you will also have to do as this pad design is very large but follow the link below and hopefully ive made it clear enough :) link for instructions to follow https://imgur.com/a/ZKcLP2q for VR please search loaded industries showroom

Nemesis Harvester Unit. Reverse engineered from ruins uncovered at Obsidian Dragon Headquarters. These Alien Mining Unit are out of this world! Available Harvester X1 set for 1 Miner 250k xs core Harvester X2 set for 2 miners 500k xs core Harvester X4 set for 4 miners 1million s core VR Dracks ShowRoom

putting big L core stations together is fine but when you want to break up the monotony, give this connector module a whirl. Still an L core but a little smaller to add some depth to your modular stations. Features a nice throughfare windowed walkway to transit between cores and also look out over the 10 XS sized landing pads. Check it out in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42319.9264,202282.6245,33492.4846}

-- Can be viewed in VR: Hadron HQ Alioth --- Introducing the Hadron M Factory The factory shell has been laid out for production of all T1 to T3 pures, products, parts and elements, with plenty of room to install T4 + T5 if needed. Comes with 5 floors and 6 mining units connected to the Jericho mining script. Comes with programming boards preinstalled for augmented reality labels, allowing you to quickly locate industry on any floor and easily read the layout of the factory at a glance. The container hubs are placed on customizable screens so you can neatly organize your storage to your needs. The blueprint uses T1 voxel and luminescent glass exclusively. No industry units or containers are included in the blueprint as the augmented reality makes installation of industry easy. This is so you can choose what to produce when you want or need it. The images alone aren’t enough to showcase all the detail our factory has to offer so please visit us in VR but remember to purchase in person! VR: Hadron HQ To showcase the factory and explain the layout we made an video tour of the factory: https://www.youtube.com/watch?v=BJXpXqc4MaI