Dual Universe Creators

Im happy to be back after a long break with a new 4 core static building (garage / workshop) you can visit in VR- LOADED INDUSTRIES NEW LOCATION your find the build on the left hand side of the main showroom, you will find a dispenser in main showroom and inside the new building Treat your ships to a new storage area or even build new ships within the garage, plenty of lighting and space to work with, viewing area both ends of the build and storage space for containers in the 4 pillars, plenty of room to land and lift off your ships from the centre of the building with an open roof or even place your space elevator in the centre, sorry i forgot to remove my name above the entrances before making my bp's so your have to remove and replace with your own name, after moving to the desert myself and noticed how uneven the ground is i have raised the floor of the building so it gives you alittle room to place on uneven surfaces without looking like its floating in the air with plenty of space under for you to extend if needed by just copy and paste parts from the original build, each section takes around 17.5k of plastic honeycomb to make, in the near future there will also be a landing pad released to go with this building also 4 cores. you will receive 4 blueprints for this building, when snapping together make sure once you snap to the first core that you press HOME key then END key and you should line up prefectly then just rotate into position, double check you joins before you deploy construct.

S Core Storage building Clean up your tile. Place Containers or a small factory inside Pb Requires 1 Sliding door M 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

Dry Dock LC-01 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

PYRAMID OF KHUFU PERFECT SCALE REPLICA OF THE GREAT PYRAMID OF GIZA LARGEST POSSIBLE ON AN L CORE PERFECT 3-4-5 TRIANGLE 20,000 M3 VOXELS 2 ELEVATORS 50 M3 LUMIN GLASS THERE IS AN OPENING ON THE LEFT THAT ALLOWS EASY ACCESS FOR BUILDING WHICH CAN EASILY BE CLOSED WITH THE LINE TOOL. THERE IS ALSO A SECOND CAPSTONE INSIDE NOT MADE OF LUMEN GLASS TO AID IN GETTING CREATIVE WITH THE COLORS THE PYRAMID TOP CAN BE.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

welcome to the redlined showroom, this showroom is on a large static core you can visit in VR search loaded industries showroom, it has 2 very large showroom floor space 1st and 2nd floor to display your ships etc or can even use for just about anything you like,

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

The plan was to test out how to make a space station about 65KM from the planet. Assuming I'd succeed the idea behind the station was to use it for making fuel and basic scrap without having to land on the planet. So I obviously succeeded at making the space station however, the location was completely wrong for the job. It turns out you need to make the space stations away from where your bases are and stock them with resources you need at those locations. That said it was fun doing it for the first time and the views are super.

From the mind of our long-term Shadow Union member, Legate, and all-around good guy hailing from the South of London may I present Alethion's "CITADEL OF DOOM". Put a factory in it, put a showroom in it, try to summon Skeletor for the ashes in there, come on down, and pick yours up today. not guaranteed to summon Skeletor, or any other, devil, demon, wraith, specter, phantasm, ghoul, spector, spooks, or ghosts. From this dimension or any others. Good day. ::pos{0,2,45.8846,92.0773,15.9071} Vr/ is Shadow Union Alioth Showroom 26km north of Market 6

Decorative Element 20 Voxel Diameter drm free VR "Alioth Marina"

This will make 55 different elements to help you along your way of ship building. This factory has my most updated labeling screens, scripts and every industry is labeled by the Tier of parts or products it makes.! Adjustor XS- x2880 Adjustor S- x720 Adjustor M- x180 Adjustor L- x45 Aileron XS- x360 Aileron S- x90 Aileron M- x22.5 Atmospheric Airbrake S- x720 Atmospheric Airbrake M- x180 Atmospheric Airbrake L- x45 Atmospheric Fuel Tank XS- x720 Atmospheric Fuel Tank S- x180 Atmospheric Fuel Tank M- x45 Atmospheric Fuel Tank L- x11.25 Atmospheric Radar S- x60 Cockpit Controller- x45 Command Seat Controller- x180 Compact Aileron XS- x720 Compact Aileron S- x180 Compact Aileron M- x45 Databank- 2880x Emergency Controller- x320 Gyroscope- x720 Hovercraft Seat Controller- x180 Landing Gear XS- x960 Landing Gear S- x80 Landing Gear M- x20 Landing Gear L- x5 Programming Board- x720 Remote Controller XS- x320 Retro-Rocket Brake S- x720 Retro-Rocket Brake M- x180 Retro-Rocket Brake L- x45 Rocket Fuel Tank XS- x20 Rocket Fuel Tank S- x5 Rocket Fuel Tank M- x1.25 Rocket Fuel Tank L- x0.31 Space Fuel Tank XS- x720 Space Fuel Tank S- x180 Space Fuel Tank M- x45 Space Fuel Tank L- x11.25 Space Radar S- x60 Stabilizer XS- x720 Stabilizer S- x180 Stabilizer M- x45 Stabilizer L- x11.25 Vertical Wing- x1152 Warp Drive L- x1 Wing XS- x720 Wing S- x180 Wing M- x45 Wing Variant M- x45 Wingtip S- x1152 Wingtip M- x1152 Wingtip L- x288 VR: "VO Factory Sales" Discord Name: theOmega28.36#1869 Discord Channel: VO Industries I stand behind all my factories. If you have any issues please reach out to me and i will be more than happy to help resolve any questions or issues you may have. If i do any updates to any factory you already have, i will upodate it at no cost to you. I have a discord for VO Industries that you can join to help keep up with updates and future factories along with support tickets and other factory related topics!