Dual Universe Creators

Give your favorite ships a touch of class with our DRM free touch screens (as seen on the Eclipse). Backgrounds are PNG since LUA drawings have no graphical editor. I am no LUA expert but the original code was provided by NQ-Deckard who (in my opinion) is! (DU-Forums) Simple LUA editing knowledge is required. Tinker with the values and you will quickly understand what is going on. It should be noted that "--" uncomments a line. Thanks to Suppe and his instructions in the screen code. Simple to deploy as you can omit the forcefields (the only T3 elements in the blueprint). All code is updated for LUA revamp. 09.2022 Have fun and LUA-fy your ships! VR: Hadron HQ Alioth

This site provides a interactive 3D representation of the Dual Universe Solar System: du-map.com ** Please bear with us as this site is under constant development. We appreciate reports of bugs as well as ideas/feature suggestions. These can be submitted via our community discord (link below) ** This is useful for 3d spacial representation of planets, moons, asteroids and any other ::pos waypoint. This can be done by panning, zooming and rotating around the solar system. This is very helpful in planning safe travel routes outside of the safe zone. You can also save and map out waypoints (::pos). These can be labeled as Constructs, POIs, Space Stations and Asteroids. Waypoints can be organized into sharing groups. These groups can either be privately shared with invited/accepted friends, or listed publicly for anyone to join. The owner of a share can modify and give specific permissions to other members within the share group. We do our best to maintain asteroid locations throughout the week. These locations are available to anyone via our public "Weekly Asteroids" share. If you would like to help maintain asteroid positions, please reach out to Zer0Krypt#0001 or join our discord community (link below). Discord Community: discord.gg/UTEcgP9Avj Site Developers: Deadrank#9867 and Zer0Krypt#0001

A HUD Less factory monitoring script! A single board script for diplaying all your factory information. This script is helpful for those that dont like using HUDs and can be used on 1 to 9 screens depending on factory size. https://www.nexusmods.com/dualuniverse/mods/7/

MANY THANKS TO RyanPryde FOR UPDATING THE SCRIPTS TO WORK IN 1.4!! (new link under "To install" below) v1.2 - Fixed support for Athena shield rarity, variable shield pools and more precise resistance setting. v1.1 - Added customization via lua parameters - change the look to match your setup. See a video of the interface in action (descriptions are in the subtitles/CC of the video): https://youtu.be/_1-vTFibuoo This is a direct replication of the shield unit's control interface, placed on screens so it can be used from seats, at engineering stations etc. Future Proof (uses the new screen RenderScript technology). Each screen manages it's own energy pool, allowing for multiuser or as pool presets. To install: https://github.com/RyanPryde/DU-ShieldScreens Feedback and requests are welcome.

Dual Univers Advanced flight script Default++ developed since 2017, is the most advanced and innovative flight script with a unique navigation operating system. DU flight parameters are brought to you to an other level with dozens and dozens of customizable settings. source files and explainations all on github: https://github.com/JeronimoDU/Default-PLUS-PLUS

Screen showing the stats and values of every atmospheric engine in game. A massive upgrade over my old screen showing only large engines. Great for display or shipbuilders. - Multi Page! Just click screen to flip pages. - Hover over the text to see that engines picture. - Now DRM FREE! Copy to your own screens. - Option for screen flipping. --- Discord --- https://discord.gg/KcafbTSwMp --Github Link--- https://github.com/LocuraDU/DU-Locura-Information-Screens --- Buy Locations --- Locura Shipyard @ ( ::pos{0,2,29.8110,107.2521,5.2659} ) --- VR Locations -- View Units: Locura Shipyard -- Other VR Locations -- Locura Exchange Store

--Still in development Free Industry script to manage and update products. https://github.com/Anauine/DU-MachineControl

A small Node.js CLI built to ease the development of Lua scripts, from small to large ones. https://github.com/wolfe-labs/DU-LuaC ⭐ Features: • Project files and management, with configurable link types • Multiple source file support, compiled to Lua, JSON, YAML and CONF • Code on your favorite IDE or editor, be it VS Code, IntelliJ IDEA, Atom or even Notepad! • Automatic code completion support when used with EmmyLua on VS Code and IntelliJ IDEA • Multiple build targets, such as development and production, allowing control over minification, etc. • Multiple entry-point support, allowing you to use a single codebase to code multiple components of a build, such as different Programming Boards, seats, etc. • Support for code libraries, both built using the compiler and outside it • Integration with GitHub Actions available • Built-in helpers for linked element detection and event handling, no need to worry about multiple filters anymore! • Copy output JSON/YAML code directly to your clipboard, speed up your workflow! 📋 Requirements: • Node.js 18 or LTS • Tested on both Windows and Linux 🚗 Getting Started: 1. Install our CLI tool via `npm i -g @wolfe-labs/du-luac` 2. Run `du-lua create hello-world` to create a new project folder or just go into an existing one and run `du-lua init` then follow the prompts 3. When ready, run `du-lua script-add main` to create your main Lua file 4. Run `du-lua target-add` to create a new build target 5. Run `du-lua build` to compile your project You should now be ready to build your next big thing! ℹ️ Source and Documentation URL: https://github.com/wolfe-labs/DU-LuaC/

PvP Suite includes 4 different scripts at the moment. **Converted to DU v0.30 and to support fully implemented LUA revamp in a future** 1st script: Gunnery seat which includes all weapon, shield, radar and targeting systems. 2nd script: Remote control to make solo PvP possible and includes all navigation ,engine and fuel systems. 3rd script: Utility script for Programming Board, and includes things like Damage report, Periscope, landing lights, automated landing gears and prolly much more useful and useless(but fancy) things in a future.. Also: Cockpit conversion of the whole suite for XS ships, which is only one script. Features: Weapons and targeting: -Weapon Hit Probabilities -Target info when selected (including unique construct id) -Detailed info when target is identified -Compact identified construct list with detailed info -Support for different amount of weapons (1-10) -Transparent non widget Periscope Shield, core and elements: -Shield resist changing is now more simplified, resists will be changed with 2 hotkey presses: For example alt+1 (antimatter) and alt+2 (electro-magnetic) will set resists to 40-40-10-10, alt+1 and alt+1 will set resists to 70-10-10-10. -Feature to put shield on when taking the seat -Feature to put shield offline when leaving the seat (disabled by default) -Automatic shield enabling when entering PvP space -Shield will be put on automatically after venting process -Resist stress values -Shield HP -Core stress -Resist and venting cooldown indicators -Shield offline safety, safety will prevent accidental shield disabling. Safety has LUA parameter and you can also toggle it with hotkeys -Element damage report(on utility script), will list any element on ship with damage Navigation and engines: -Engine control based on tags, ability to shut down and on engine groups, great for fuel saving -Hotkeys ALT + 1-8 will toggle engine groups on/off ALT + 9 will switch all engines on instantly -Brake toggle -V-Booster shutdown when landing -Brake distance indicator -Thrust indicator -Altitude to ground indicator -PvP Zone distance indicator, will show now distance to Safe Zone on any range too when in PvP zone -Fuel tank support up to 6 tanks -Warp Destination with required and remaining warp cell information -Acceleration indicator -Current speed/max speed indicator Other and Interface: -Databank is required to store many settings like engine group status and other settings. -Key G now switch ALT + 1 - 9 hotkeys functions. This means you either use them for Shield resists, Engine control or Other controls. -Indicator to show which side hotkeys are currently assigned for. -Automatic landing gears. Gears will react to altitude to landing pad or whatever, and will extend before the landing, and rectracts when you take off. -Landing lights support, fancy blinking lights if you want! Blink will be faster when you get closer to the ground and will turn lights off after landing is done. -You can hide the build menu -Feature to show ammo container remaining ammos -Feature to show nearest planet/moon atmo/no atmo collision range -General font size modifier LUA parameters -Rename option for engine groups -Rename option for fuel tanks -Parameter for Locked View(straight ahead), Left Alt is Freelook -Parameters for widgets to shown or hide -Parameters for many other features -Parameter to allow or disallow negative throttle value -Parameter to start remote controller with brake toggle on or off -Parameter to disable or enable almost every feature Console commands: /helper on - shows buildhelper /helper off - hides buildhelper Easy installing, just link elements Planned features: -Detailed damage report from enemy hits like what type of damage and how much is absorbed etc. -Friendlies list via transponders -Id converting to letters for easier target calling -Probably much more Selling is now on hold until NQ decides and makes official statement about wipe rumours and what happens on release. There will be individual and org packs and prices also will be decided after possible wipe. If you are interested, join my scripting discord at https://discord.gg/ttajxhZYXY or on my channel @du-creators discord

Free HUD for Dual Universe (PvP/PvE oriented) https://github.com/anatoly-kussul/du-wthud Can also use be used as a flying sript for you haulers. New design is highly inspired by simplicity of Albatross hud Core Features: - Custom auto resists. (Based on last 30 seconds of incoming damage, multiple modes available) - Shield timeline graph - In/Out DPS chart - Disable rotational dampening for smooth rotations (very helpful in pvp to keep optimal tracking) - AR marks of planets, closest pvp border, custom marks and more Atmo Features: - Atmo Burn Limiter (Limits your thrust to not exceed atmo burning speed) - Atmo Reentry Burn Limiter (Automatically shuts down engines and engaging brakes to slow down below burn speed on atmo reentry) - Auto level - Altitude hold

An expanded version of my Factory Monitoring Screen for people with crazy big factories. Basic version resulted in text overlaps and eventually script crash due to 50k characters limit per screen. This version displays Metalworks, Electronics and Glass industry on screen 1, 3D Printers, Chemical Industry, Refinersm Honeycomb and Smelters on screen 2 and, finally, Assemblers on screen 3. I figured out it should be a proper setup for most big factories tho I know some of you are crazy :P Simply connect core and 3 (or 9) screens (in any order) to Programing Board and run the script. I humbly suggest setting refresh rate (In Lua settings) to 5 to avoid possible laggy situations with a lot of industry running. Script comes with industry locator. Type help in Lua Tab to see available commands. grab it here: https://github.com/BartasRS/Factory-Monitoring-Expanded As always, tips are appreciated but not required. Enjoy

free script, get it at: https://github.com/rohimma/du-atlas get all your bookmarks on one easy to manage screen. activate the programming board and click on the location where you want to go

Essentially, this script provides an AR overlay to your world to view waypoints you have set with Archaegeo's script, in addition to the planets around you. Like all AR scripts made with the AR projection library, there are specific conditions under which this script functions correctly. If you are on a planet, assuming you aren't in a cockpit in another ship, the script should function flawlessly. It will only work in a seat on the construct the programming board was deployed in, and only if you correctly calibrate said seat, assuming you have "freelook" enabled. What freelook enables is a way to track where your camera is looking purely based on your mouse movement. Of course, this comes with one major downside: it won't work in the third person. Nor will it work if you don't calibrate your pitch and heading. Calibration takes place in the form of looking either up or down, pushing your mouse past the limit you can look and then looking either left or right. The accuracy is around 1 degree when looking straight on if the calibration was done properly. (Inaccuracy is purely a result of the mouse capture not being absolutely perfect) In space, as long as you are on the ship the programming board was activated on, it should function for both in a seat, walking around and jetpacking. Note that for walking around, you need to calibrate your pitch. There are a couple more settings to change around if you want to. However, that is about all you need to know. To use the script, copy the JSON file contents found in the link below and select something like "paste Lua script" using a programming board. Connect the programming board to the core, and activate! If you have some saved waypoints using Archaegeo's script, connect the databank to it, and it should load his script's waypoints as well. Link: https://github.com/EasternGamer/AR-Library/blob/experimental/NewWaypointer.json Disclaimer: I coded this, however, Archaegeo provided the idea, hence when starting the script he is credited and used to host the script.

JSE++ Space Elevator script Best adaptive space elevator script since 2019 JSE++ runs a compact version of the operating system Default++, allowing you to control with ease your construct every single parameters from anywhere on your construct, with its unique system of on player screen widgets. Default++ is an on player screen widget system, where you can interact with your mouse the widgets and buttons, drag and resize widgets at will. JSE++ is as of today uncontested the fastest, the safest, most accurate and easiest to use and configure elevator script for "your" elevator design. It will fit for any type of cargo and will give you enough parameters for you to play with to achieve ultimate performances. - Professional version: 5 to 6Mh * check on the uploaded pictures for features (lite version doesnt exist anymore) If you are a skilled designer and interested into participating into the space elevators Atlas project and resell your version of the Atlas with JSE++ script on it, contact me directly for more about the terms. Always available on discord for more info

UPDATE - Tested and working in latest version of DU - Existing customers can upgrade for just 500k Showroom and BP dispenser on Alioth (near Market 17) ::pos{0,2,36.4289,57.9012,22.7369} Surrogate VR: NoxCorp Showroom The NoxCorp Ship Stat Screen V2 is an improved full RenderScript rewrite of the original HTML version. Screens that use RenderScript instead of HTML look sharper, render at greater distances and are significantly better for game performance. Version 2 brings much more customisation including: - Custom text and logo - Choice of text layouts - Choice of fonts - Change all colours, backgrounds and borders - Customise or switch off the star animation - Use custom backgrounds All customisation is done at the very top of the script, all settings have clear explanation and example values. The render cost is around 1 300 000 / 4 000 000 depending on content. The blueprint is provided DRM free which allows you to reuse infinitely. This is reflected in the cost. You can also transfer the money to me via your wallet in-game and I will paste the code to you on discord (no need to travel).