Dual Universe Creators

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

-- Can be viewed in VR: Hadron HQ Alioth --- Introducing the Hadron M Factory The factory shell has been laid out for production of all T1 to T3 pures, products, parts and elements, with plenty of room to install T4 + T5 if needed. Comes with 5 floors and 6 mining units connected to the Jericho mining script. Comes with programming boards preinstalled for augmented reality labels, allowing you to quickly locate industry on any floor and easily read the layout of the factory at a glance. The container hubs are placed on customizable screens so you can neatly organize your storage to your needs. The blueprint uses T1 voxel and luminescent glass exclusively. No industry units or containers are included in the blueprint as the augmented reality makes installation of industry easy. This is so you can choose what to produce when you want or need it. The images alone aren’t enough to showcase all the detail our factory has to offer so please visit us in VR but remember to purchase in person! VR: Hadron HQ To showcase the factory and explain the layout we made an video tour of the factory: https://www.youtube.com/watch?v=BJXpXqc4MaI

Let off steam after a long day in the factory on your own functional basketball court. Use the manoeuvre tool to throw the balls across the court into the hoop. Lasers in the hoop detect the balls and trigger one of four lights on the backboard. Come and try it yourself by visiting via VR by searching "NovaX Estates" https://www.youtube.com/watch?v=iiSU7WV6cWQ&t=2s If you could like to have the basketball court snapped to an existing structure or grid, it can be installed for you for a 5 mil quanta fee. Contact: Actimist#4020 Primary designer: Actimist Contributors: Factory worker:

This is a modular showroom allowing you to make it your own - Each panel is available at the corners in the showroom so you can change up the outside as you see fit. There are 4 pads on the edges to show off 4 S/XS cores and plenty of space in the middle to show off an M core. Hallways underneath are leveraging the "DF Firestorm Hallways & Decor" voxel library which is also for sale (voxel library is DRM Free!!). How to find: - VR - Search for "DSI Dark Forge HQ" (do NOT buy a BP in VR!!) - ::pos{0,2,21.9994,107.1816,6.5935} - Dispenser is in front of the building, near Alioth DM7 Cronus#2214 or Firestorm#4004 on Discord if you have any questions!

PYRAMID FUEL FACTORY: MAKES FUEL, AND A LOT OF IT MAKES; NITRON 600KL PER DAY KIRGON X1-X4 300KL PER DAY OF ONE OR APPROX 75KL OF EACH EASY TO SET UP, EASY TO EXPAND STORAGE WE NOW HAVE A MODEL THAT MAKES XERON TOO 100KL PER DAY same price READ OUR BIO FOR MORE INFO

Tiny Warp Cell Fuel Factory (TWCFF) Need warp cells? Or maybe just some fuel? Setup this easy to use warp cell, atmo fuel, and space fuel factory. With base skills it will produce ~74 warp cells a day and at 3's it will produce ~90 warp cells per day. Perfect to keep your warp shuttles fueled! To change how much gets produced merely click the up and down arrows on the screen. Fuels go up/down in increments of 1000, and warp cells in increments of 25. You will find everything you need in one container hub. Feed the ores and schematics there (make sure to mark it as the schematics container) and the output of fuel and warp cells will be found there too. I like to keep it organized (see picture) to make it look very nice as well. Unlike the Tiny Factory, the TWCFF does not require a constant presence! This factory works just like any other industry. When you deploy this factory and start the board up front that controls the screen, it will auto configure all of the industries for you so you won't need to go in and figure out what maintains you need to set each industry at. Very convenient! Only thing you will need to do is add 3L of Catalyst 3, included with the blueprint, to a container hub under the info button in the "server room". The server room contains the programming boards that will setup your industries for the first time. You will rarely need to go in there. Dispenser Location, Haven: ::pos{0,27,-14.3128,30.9315,9.6166}

My old demon statue. Full M core. VR: The Syndicate Shop BP can be purchased on Alioth near market 6. ::pos{0,2,31.6129,108.1439,2.4078}

The plan was to test out how to make a space station about 65KM from the planet. Assuming I'd succeed the idea behind the station was to use it for making fuel and basic scrap without having to land on the planet. So I obviously succeeded at making the space station however, the location was completely wrong for the job. It turns out you need to make the space stations away from where your bases are and stock them with resources you need at those locations. That said it was fun doing it for the first time and the views are super.

Update 2.0 also i trade for ore on bps so if you dont want to use your quanta i trade for ore. There are 2 versions of this one with 5 containers placed as in picture for reference on placing and one without both are the same price. Available at alioth vr "admi build store" for location and such will be building onto this location as time goes foward and sales too lol.

50% off blueprint price at the moment on dispenser Welcome to my latest static build, Im really happy how this came out, build all your future ships in style or just store them, has storage space on balcony and also comes with landing pad on roof top not really much else to say i think the pictures says it all :), you can view in VR search loaded industries, This hangar is also available in kit form please check my other posts any question please Dm me on discord or add me in game loaded

BP dispenser located on Alioth at ---> ::pos{0,2,24.6416,120.5044,3.8850} That building is in an L Core. I don't like the huge factory blocks at all, so I took an L Core and gave myself free rein in the dimensions and design of the building. From my point of view, the entire core does not always have to be used. It is important to me that buildings fit in well with their surroundings, be it in the city or in the country. The building is an empty shell! Setting up the factory or your office in the building is entirely up to you. Below the asphalt there is enough space for you to build your own cellar with containers and industry. you can find the core in the center below the floor if you have any questions or suggestions for improvement, please let me know! VR: "Calpone Showroom" dispenser ---> ::pos{0,2,24.6416,120.5044,3.8850}