Dual Universe Creators

My first Sanctuary Structure and probably the only structure, which I have actually used that I will share here. This is because I like to make underground structures and they just look like boxes from the outside. I designed it with a landing pad, public hatch to allow people into what I imagined would be a store when I build it and a private elevator to allow me quick access to the interior, that is locked away from the public. Inside I have a few decorations, separate shower and toilet and one bedroom. Also have below that, what is now a store room but did start out as a factory room. Technically the images are showing the top of a Large static core but I liked the roof so much I recreated it (transferred it) to the large core when I swapped out the XS core (and S core I was using as a factory under, Under Snowy). So basically the reason I am sharing this is the landing pad on top and windows peaking out over the ground surface. Note Snowy is what I called my sanctuary tile because it has some snow in some places. I picked the tile because I wanted to see what the map was showing. It turned out the map was accurately depicting the snowy areas.

ADMI Outpost with a landing zone for a roof is a setup that looks nice for either storage and or mining outpost as well. there are 6 basic large mining zones and other than some lumi all the voxels are t1 so easy to get made and put into the world where you need it or if you have a friend that just joined and needed a decent starter base. vr ADMI Build store for a look. thanks!

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

Last few months I have been working on this Market Replica. It worked out pretty well. Just check it out in VR. (Market Replica East and Market Replica West) Note: No market machines included. ;-) Place your dispensers there or do what you like. Beneath the base there is a ton of space to make a factory or anything you like. Currently available @ Drack shipshow. Later available @ Kosmos showroom.

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

A wall made of 3006 animated lights on a dynamic core to welcome visitors :) You can see it here : ::pos{0,2,-23.9491,-10.5283,119.8070} (Yentico base in front of Alioth Market 13) To visit in VR, search "Light Wall" Peace - YesmanDu974

VR "VO Factory Sales" We are also located at the Alioth Exchange in the Red Isle This makes all size Basic Containers. Everything is labeled with a maintain setting for really easy to setup from bp. I highly recommend letting factory run for 24 hours before starting the assembly lines for containers. 24 hour production rate with no talents that is if you set all machines to run. (The assembly lines that produce the containers do not have a maintain number set on them because i feel its up to the customer to set them as they desire) EXL - 3.75 XL - 7.5 L - 15 M - 30 S - 60 XS - 240 We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

Tiny Warp Cell Fuel Factory (TWCFF) Need warp cells? Or maybe just some fuel? Setup this easy to use warp cell, atmo fuel, and space fuel factory. With base skills it will produce ~74 warp cells a day and at 3's it will produce ~90 warp cells per day. Perfect to keep your warp shuttles fueled! To change how much gets produced merely click the up and down arrows on the screen. Fuels go up/down in increments of 1000, and warp cells in increments of 25. You will find everything you need in one container hub. Feed the ores and schematics there (make sure to mark it as the schematics container) and the output of fuel and warp cells will be found there too. I like to keep it organized (see picture) to make it look very nice as well. Unlike the Tiny Factory, the TWCFF does not require a constant presence! This factory works just like any other industry. When you deploy this factory and start the board up front that controls the screen, it will auto configure all of the industries for you so you won't need to go in and figure out what maintains you need to set each industry at. Very convenient! Only thing you will need to do is add 3L of Catalyst 3, included with the blueprint, to a container hub under the info button in the "server room". The server room contains the programming boards that will setup your industries for the first time. You will rarely need to go in there. Dispenser Location, Haven: ::pos{0,27,-14.3128,30.9315,9.6166}

Update: Blueprints are now available! VR: Hover Pad - by SVEA for a demo and location. Need a place to land you can't miss? Try our brand new L-Core Landing pad! Comes with automated guiding lights luring you straight to the middle and in case of a power outage also has nice contrasting guide arrows and markers. The pad is build on four extra large hovers so no need to work with messy pillars or other anchors to keep it down. The pad was made from a modular kit I designed, so if you do not like the outline, I am sure we can come up with something that will work for you. (except VERY rude shapes). Can also be stitched and connected to any other platform, including M-Cores. I am more than glad to set them up with you where you need in any configuration. The pad comes is build around 5 types of material you can chose yourself - Base working material, in my case black iron - A highly contrasting colour for the lines and stripes - A metal material for some detailing - primary luminescent voxels (purple) - secondary lumis for the booster rings (can be omitted) No blueprints from dispenser since I'd like to run over every installation myself. Let me know if you do need a few. Price can be discussed. component list for: Hover Pad - by SVEA **L-Core** 1x Static core L - element 4x Vertical lights L - element 48x Long lights L - element 4800 m³ Primary - Honeycomb (matte white plastic) 210 m³ Contrast - Honeycomb (matte dark red plastic) 350 m³ Metallic - Honeycomb (glossy steel) 230 m³ Building lines - (lumi) Honeycomb (red) 50 m³ Hover effect - (lumi) Honeycomb (cyan) Instructions: Gather the required materials, chose your own voxel material (make sure you have none of the originals so you can replace them) and place the blueprint core where you need it. Tip: snap it off your existing base for a nice fit and don't rotate to prevent half voxel offsets. For looks aim to have the 4 hover pads a few meters above ground level so the glow rings do their thing, but anything goes, that is all up to you! VR - Overheid's Shoppe - SVEA Location - ::pos{0,2,49.6888,160.3544,52.2589}

VR "VO Factory Sales" This will make all sizes and all models of atmo fuel based Engines including Hover engines!! You can make x4) Large, x2) Medium x2) Smalls and x2) X small engines at the same time All my factories are built to make it easy for the new players or players that dont have much experience in factories and everything is labeled to let you know what to set each unit and each unit or set of units also lets you know what schematics are needed!

Available in two different styles! Need 7680kl of storage in a box a lil larger than a XS core? This is the box for you! 10 XXL containers in the space that would normally be only 4 containers. Perfect for docking to ships, or base set ups. Perfect for any place, where you need to save space. Purchase 1 BP for 5m, or 3 BPs for 10m. --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Locura Shipyard @ (::pos{0,2,29.8840,107.7111,9.7555}) --- VR Locations -- View Units: Locura Ship Museum -- Other VR Locations -- Locura Exchange