Dual Universe Creators

L core Outpost Pad, the perfect companion for the Outpost Building Come visit at Alioth: ::pos{0,2,54.7335,109.8047,69.0288} VR: SKY Blueprint Store

PYRAMID STORAGE ROOM: DONT WANT TO LINE UP 100 CONTAINERS? DONT WANT TO MESS WITH SCREEN LUA? THIS MIGHT BE THE THING FOR YOU! 100 L CONTAINERS PERFECTLY STACKED AND LINKED IN STACKS OF 10 TO HUBS WITH CONTAINER MONITOR LUA. ONLY 1MIL QUANTA ENJOY!

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura A Series is an All-In-One solution for your Rig and Refinement needs. The Locura A4 can mine, then refine your ore so when you come to pick up it's ready to be used or sold as pure. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/KcafbTSwMp --- Buy Locations --- Alioth M6 Location @ (::pos{0,2,38.8365,100.5709,256.7325}) Haven Location @ (::pos{0,27,10.3966,-117.6575,142.6387}) --- VR Locations -- VR Locations: Locura DIS10 Mobile Store VR Locations: Locura Alpha Base

putting big L core stations together is fine but when you want to break up the monotony, give this connector module a whirl. Still an L core but a little smaller to add some depth to your modular stations. Features a nice throughfare windowed walkway to transit between cores and also look out over the 10 XS sized landing pads. Check it out in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42319.9264,202282.6245,33492.4846}

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.

We proudly present our first static entry under Prometheus first fire. Made by Vorkan and DotHack, this space station is built on a L space core and has all the accommodations you need to live into space and do all your activities. It also has a lot of space under the large landing pad to suit your factory needs and expand as you like. You want to relax after some asteroid expedition or any PvE/PvP adventures? Go take a breather in your personal sky bar that will surely give you the best view. Comes with: 1 L landing platform 4 S landing platforms 1 fuel factory 1 maintenance unit 1 DSAT 8 Expanded XXL containers as main cargo (plenty of place to put more) 4 L containers for the fuel factory all the factory elements needed for the functioning of the fuel factory All elements included in the BP. BPs available to buy in several locations: ADMI build store VR: ADMI build store (go to the Prometheus first fire floor at the top of the structure) Coordinates - ::pos{0,2,-24.6842,16.8702,151.5735} Paragon Hex showroom VR: Paragon Hex Showroom Coordinates - ::pos{0,2,35.3441,107.0564,-13.1840} Vega Industries (coming soon) VR: Vega Showroom Coordinates - ::pos{0,2,-22.4597,13.9911,-0.0001} For any questions, contact vork on discord

Moved to Alioth, 7km north of Market 6. ::pos{0,2,39.2832,101.0451,299.8752} VR to "Pagoda".

Similar to Pad A, but without the pillars. Designed to be floating in the air with AGG like voxels One interior level for storage / industry / whatever Can be seen at Aerogics Haven HQ *** Honeycombs *** Aged Brown Pattern Wood 3: stairs banister Galvanized Gray Iron: landing area Glossy Blue Plastic: lines on landing area Luminescent Icy Blue Glass: AGG voxels and outside lights Luminescent White Glass: inside lights Matte Light Brick 1: main HC Matte Black Brick: secondary HC Waxed Brick 2: tertiary HC Polished Brown Wood 2: stairs steps Polished White Aluminium: metal struts

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

2 Large Static Core Factory. Made for the most enthusiastic Factory Manager. Features placement pads & sign placement for all machines. Catwalks for easy access and a large Landing pad up top. Tons of room for storage, May take years to fill up!!!,,bit of an exaggeration here. Large enough to handle any sized organization. Come Visit at "Rifter Shipworks" public VR BP's Avail here ::pos{0,22,-32.0802,58.7871,-17.5292}

50% off blueprint price at the moment on dispenser This showroom kit will allow you to build any size showroom you wish to house as many ships as you like, its very easy to do just like the hangar kit, its panels are also same size as the hangar kit so you can even easily decorate the outside walls of your hangar with this kit or even be creative and mix and match, everything you see in the pictures of these buildings are in this kit the only thing you have to do is fill the empty space on roof and make your own link from the balcony curve which is all very easy, also comes with a detailed floor panel 50 x 50 voxles in size for very easy placement which you can use in any of your other buildings you may own. you can with a bit of time change the mats of all the panels to suit your colour of choice endless possibility, you will also find what i call end caps to finish off parts that are left open from your build can view in VR search loaded industries showroom any questions please dm me on discord loaded#2378

In the process of moving, blueprints are available to Kosmos Exchange. Fun and Funky little space station. You too can create a nice little home in space with this station. Landing pad on top, nice spacious hangar, plenty of room for industry and storage all in a colorful package. Easy to expand with access doors on 3 sides to add more landing space. Industry area has a couple of different expandable set up options for your convenience. Plenty of space for parts storage as well. Gates are not included in the blueprint to help lower deployment costs. T1 Honeycomb. See it in VR at "Czar in Space" or here ::pos{0,0,-42004.9319,202233.7259,33629.9593}

We are thrilled to announce the launch of the Double L Core Hangar. This hangar is designed to provide you with the ultimate storage solution for your ships. With its Double L Core design, it offers ample space for your ships while keeping them safe and secure. The Double L Core Hangar is built to last, with a sturdy construction that can withstand even the toughest of conditions. It is equipped with the latest technology to ensure that your ships are always in top condition, with advanced climate control systems that regulate temperature and humidity levels. Whether you’re a seasoned pilot or just starting out, the Double L Core Hangar is the perfect choice for all your storage needs. So why wait? Get your hands on the Double L Core Hangar today and take your flying experience to the next level! 2 Blueprints included VR: SKY Blueprint Store ::pos{0,2,54.1655,109.9058,46.1828}

A futuristic looking hovering mining drone with: - 4 mining units - 1 container L with an accessable hub at the ground - an elevator to the top for calibration (must be brought to the ground after placing the mining drone so that it is not stuck in the ground. The elevator is located directly under the antenna m) - core size M, to be able to place more containers around the drone for additional space or decorative reasons