Dual Universe Creators

12 Large (static) core runway 2x6. full built with skirt runway is all at the top of the cores so can make skirt taller if desired to put stuff under it. Will be making another much larger version in the future after i make more quanta! vr Admi build store or visit at ::pos{0,2,-24.6842,16.8702,151.5735} runway is outside the landing zone for display will eventually put the landfall pads around it as they are built for it. Thanks for looking and buying and all that stuff!!!!!

The BEST most USED mining rigs in Dual Universe gets an update and a re-release. The Locura X8 Pro is our most ambitious rig yet! All the features of the X8 with a new look and larger landing pad. M Core design for extending the landing pad even more if needed. --- Locura Rigs--- Core On Ground ( No more voxels beneath the surface ) Easy Placement ( No need for terraforming to place bp ) Easy Removal ( No digging for voxels, so you can remove core ) Easy Calibrate ( Easy reach units for calibrations ) Easy Surface Mining ( Foundation off ground for easy calibration ore mining ) --- All Rig Features --- - Locura Modded Storage LUA Screen --- A Series Features --- - Mining And Refining --- L Series Features --- - Lightweight (Take More Rigs With You) - Cheap - Less Elements - Less Honeycomb ---X Series Features --- - Locura Modded Calibration LUA Screen - Landing Pad (Except X6) - Resurrection Node - VR Pod - Long Term Storage (Except X6) --- Discord --- https://discord.gg/TB2ecEd5rs --- Buy Locations --- ::pos{0,2,12.8827,97.8847,-0.0001} VR : Locura Distribution Sales

This will make 55 different elements to help you along your way of ship building. This factory has my most updated labeling screens, scripts and every industry is labeled by the Tier of parts or products it makes.! Adjustor XS- x2880 Adjustor S- x720 Adjustor M- x180 Adjustor L- x45 Aileron XS- x360 Aileron S- x90 Aileron M- x22.5 Atmospheric Airbrake S- x720 Atmospheric Airbrake M- x180 Atmospheric Airbrake L- x45 Atmospheric Fuel Tank XS- x720 Atmospheric Fuel Tank S- x180 Atmospheric Fuel Tank M- x45 Atmospheric Fuel Tank L- x11.25 Atmospheric Radar S- x60 Cockpit Controller- x45 Command Seat Controller- x180 Compact Aileron XS- x720 Compact Aileron S- x180 Compact Aileron M- x45 Databank- 2880x Emergency Controller- x320 Gyroscope- x720 Hovercraft Seat Controller- x180 Landing Gear XS- x960 Landing Gear S- x80 Landing Gear M- x20 Landing Gear L- x5 Programming Board- x720 Remote Controller XS- x320 Retro-Rocket Brake S- x720 Retro-Rocket Brake M- x180 Retro-Rocket Brake L- x45 Rocket Fuel Tank XS- x20 Rocket Fuel Tank S- x5 Rocket Fuel Tank M- x1.25 Rocket Fuel Tank L- x0.31 Space Fuel Tank XS- x720 Space Fuel Tank S- x180 Space Fuel Tank M- x45 Space Fuel Tank L- x11.25 Space Radar S- x60 Stabilizer XS- x720 Stabilizer S- x180 Stabilizer M- x45 Stabilizer L- x11.25 Vertical Wing- x1152 Warp Drive L- x1 Wing XS- x720 Wing S- x180 Wing M- x45 Wing Variant M- x45 Wingtip S- x1152 Wingtip M- x1152 Wingtip L- x288 VR: "VO Factory Sales" Discord Name: theOmega28.36#1869 Discord Channel: VO Industries I stand behind all my factories. If you have any issues please reach out to me and i will be more than happy to help resolve any questions or issues you may have. If i do any updates to any factory you already have, i will upodate it at no cost to you. I have a discord for VO Industries that you can join to help keep up with updates and future factories along with support tickets and other factory related topics!

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

This will make 45 dispenser every 24 hours with no boosting talents We have several other factories to choose from and some are in space versions. We also have LUA Scripts and Mining Rigs by Credence! VR: VO Factory Sales Located on Alioth ::pos{0,2,26.8385,76.5585,0.9775} Discord: theOmega28.36#1869 Credence#4249 We also have a Discord as we provide details on our factories and notify everyone as new ones are built and ready to sale along with additional information and available to answer any questions

If you're like me, you love Dual Universe and the amazing freedom it gives us to build whatever we want. However, some of us are more inclined to fantasy settings over Sci-fi. Others might just want a change of scenery for some of their buildings. If this is you, then check out Stormsteel's Fantasy Building Kit. This kit uses almost entirely t1 honeycomb by default, with the tiniest bit of lumi glass. The Fantasy building kit includes pillars and several wall stylings to build a castle or cathedral-like structure. Various doors and windows allow you to differ your indoor vs. outdoor styling or just have a nice variation all around. The kit also includes several decorative voxel pieces such as crystals and hanging banners. This Kit will continue to be updated, and as it improves the price may rise. However, once you own it, you will never have to pay more to receive the updated versions. See below for current version and Changelog. VR to "Stormhold" to see the Fantasy Building Kit in person, as well as Stormsteel's personal hanger build with it. Blueprints can be purchased via Dispenser at ::pos{0,2,51.3456,99.1264,-0.0000} - BPs can also be delivered to you at any of the District Markets (especially 6). The BP dispenser at the entrance of the hangar. At the top of the stairs pictured above. Current Version: 1.1 Change Log: 1.1 -Basic Blue Ceiling Added (inluding diagonal section) -Added floor tiles to go over diagonal wall peices -Added parapets to go on top of pillars

Welcome to the Dark Forges Scrapyard. VR: DARK FORGES HQ The idea of the Scrapyard is that new players can come and buy elemets that you had on your constructs that's totally destroyed and do not have the quanta to buy/make a new one. Or for the old experienced player that are building new stuff and need to test and experiment with maby a new heat shield etc, so instead of buying/making new stuff, you can save some of your hard earned quanta by paying us a visit. The DAFO think with this idea you bring more to the game, yes you can dismantle an element. But you never know what you will get out of it due to the random component you get. And so to sell the element or even a ship, you can get more out of it. Because face it, you will have more of use of an UNC.atmo L engine, even if you just can repair it 1-2 times more, than one UNC.reinforced frame in your pocket. And yes. We even sell ships at the Scrapyard. We sell them either repaird, with elements that do not have full repairtimes on them, or unrepaird so you can get it cheaper and need to repair it your self. We even buy elements that's broken, the repairtimes are what determines the price of the element/ship that we are looking at to buy. So if you are a scavanger come by and show us what you have. If you are a new or old player looking to save some quanta come on by and check whats in stock. For the best updated prices, head on over to DAFO discord, and check out the Scrapyard chanel. !REMEMBER! The items at the Scrapyard change all the time. So you will need to check out the discord, or visit to see whats in stock!!

DPS Hexa Pads - showroom and parking pads with a diamond plate structure. Static XS BPs (DRM) with different patterns, prices vary depending on the complexity (1,000,000 to 2,500,000). IMPERIAL CREST special edition available - for all fans of a well-known scifi franchise! VR: Deeh Store (dispenser + preview -> basement) If you have questions, don't be shy - contact me on Discord!

Nemesis Harvester Unit. Reverse engineered from ruins uncovered at Obsidian Dragon Headquarters. These Alien Mining Unit are out of this world! Available Harvester X1 set for 1 Miner 250k xs core Harvester X2 set for 2 miners 500k xs core Harvester X4 set for 4 miners 1million s core VR Dracks ShowRoom

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

Hadron Mining Platform 4 Designed around our signature Hadron theme, the Mining Platform 4 delivers style and function to any outpost or mining operation. Comes equipped with 1x M Basic Containers and each mining unit housing includes markers for quick and easy placement. The centralized VR station provides instant access to all mining units on the platform without the need to move from the spot. When deploying the platform, make sure the stairs and the voxel square at the bottom of the platform are above the surface of the terrain. This will ensure you have access to the container if you choose to swap it out. The raised platform and circular arrangement of the mining units allow the bonus ore to spawn in a ring around the construct allowing for ease of access when collecting.

Last few months I have been working on this Market Replica. It worked out pretty well. Just check it out in VR. (Market Replica East and Market Replica West) Note: No market machines included. ;-) Place your dispensers there or do what you like. Beneath the base there is a ton of space to make a factory or anything you like. Currently available @ Drack shipshow. Later available @ Kosmos showroom.

Here it is, the L Core deluxe do it all station! Places for everything and have it all. Parking, YES!, build a big ole factory, YES!, Build Storage, YES!. Set up a 170 element storefront, YES! You do you, this is the station to help you do all of that! L Core, 4 Main levels and 5 Mid levels Exposed modules brings a neat look to DU with color coding to differentiate the modules' purpose. Recolor kit for the module rings available. Plenty of enclosed storage or living space ready for you to make it your own. ingredient list in the pics Only elements in the blueprint are 100 some lights, 11 elevators, a surrogate station and the L Core. See it in person or in VR at "Czar in Space" Placement is Rotate 90 degrees clockwise. Starting at one voxel above the platform you want to match up with, 133 clicks down

Are you looking for a space adventure that combines comfort, productivity and security? Then look no further than the SKY Aegis Multi M core space station from SKY Industries! This is the ultimate space home for you and your crew, featuring: - A spacious and cosy living area with a panoramic view of the stars - A fully equipped office space with high-speed communication and data storage - A small factory area that lets you craft and repair your own equipment and vehicles - A XS core elevator dock - 4 M core doble landing pads The SKY Aegis Multi M core space station is designed to be modular, customizable and expandable, so you can add more pads to form a larger base. The SKY Aegis Multi M core space station is available now for only 4.3 million! VR: SKY Aegis Alioth Station Visit ::pos{0,2,54.7335,109.8047,69.0288} to get your Blueprint today!

PYRAMID OF KHUFU PERFECT SCALE REPLICA OF THE GREAT PYRAMID OF GIZA LARGEST POSSIBLE ON AN L CORE PERFECT 3-4-5 TRIANGLE 20,000 M3 VOXELS 2 ELEVATORS 50 M3 LUMIN GLASS THERE IS AN OPENING ON THE LEFT THAT ALLOWS EASY ACCESS FOR BUILDING WHICH CAN EASILY BE CLOSED WITH THE LINE TOOL. THERE IS ALSO A SECOND CAPSTONE INSIDE NOT MADE OF LUMEN GLASS TO AID IN GETTING CREATIVE WITH THE COLORS THE PYRAMID TOP CAN BE.