Dual Universe Creators

I proudly Present the Wydee-Design warp cell factory! The warp cell factory can produce 188 warp cells a day without any talents and goes up to 240. Put the ores on the input HUb on the control room at the entry of the factory and everything is being produced for you without any action to do. Everything is well designed inside and organized in a very clear industrial layout. We bring to you lean and visual management. Production behavior: - There is enough container storage to handle a complete week production - The consumption for a week is the following: - Bauxite ~48k - Hematite ~24k - Coal ~63k - Quartz ~91k - Malachite ~18k - Limestone ~35k - Natron ~14k - Pyrite ~12k - Petalite 2.6k - Acanthite ~14k The required schematics to make this run for a WEEK are the following: - Pure product schematics P2: ~1170 - Pure product schematics P3: ~ 500 - Product schematics P1: ~1750 - Product schematics P2: ~350 - Product schematics P3: ~ 210 - Warp cell schematics: ~ 1400 All those numbers are the minimum required (with a buffer included) to make the factory running for a week with: - no talents on speed increase for production - talents lvl 5 pure P1 - talents lvl 3/4 pure P2 - talents lvl 3/4 pure P3 - talents lvl 1/4 on basic products (polycarbonate / polycalcite / polysuflide / alloys (Al-Fe, Cu-Ca-Cu-Ag / Glass (basic, advanced, Ag-Li) If your talents are a bit high than this increase the capacity to make a full run for a week by 10%. Those numbers are mentionned on the screens inside the entry hall where the materials must be inserted in front of each Hubs and maintain rules are also mentionned. To deploy the factory the entrance is in front of you when you deploy it. For BP come to see me on Haven @ ::pos{2,27,27.7968,346.8901,40.2505} or contact me on discord JamesWydee (james78650)#9448 Token are not available for now: depending on the demand I will organize myself for make those available when my talents are going to be updated to LVL 5 (in one month would be available). Come to see the factory by VR @ Wydee_ShowRoom

So, no more calibration tiles means time to own some proper mining rigs. This should make it easier... Easy install, low cost honeycomb with a custom lua script displaying all the information you could need or want. The LUA script is also available standalone! Construct: As most mining rigs only require four units, the blueprint contains four Large and two Small allowing you to disable the Small units if required. You can also choose to replace these with large units if so required. Please note, if you do use four and remove the two S cores, edit lua parameters and enter in "25" (without quotes) to the "Gaps" field. LUA Features: - Dynamic Title Change - Dynamic Plug and Play Plug in any order Screens, Containers, Mining Units (up to six) until all 10 slots used - Ability to change the order of mining units displayed. - Tile Evaluation - Ability to change ore value in settings - Storage Bar Feel free to contact on Discord with any questions: "The Unitato#5400"

50% off blueprint price at the moment on dispenser Loadeds industries presents large core space station with landing pad and open hangar space, blue print dispensor can be found at my base location, any questions please dm me on discord

NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 50% off blueprint price at the moment on dispenser loaded industries presents This stylish futuristic showroom with viewing balcony, display your ships in style with this very bright display space, this is my 20th design in dual universe, you can view in VR search (loaded industries showroom) and head straight up the road and your find the showroom, pictures dont do it justice really best to see in person, you can remove the writing and add your own name to the building any questions please message me on discord loaded#2378

Small core mining rig with space for up to 10 L mining rigs, containers and refiners. Added hatches for easy access to the surface ore. Mostly all aluminum honeycomb for easy placement.

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

One L core and 8 landing (M core) pads that align with the L core. I can help install everything For more info DM Jasper_1 on discord Discound if u buy more 2 for 25 mill 3 for 35 mill Blueprints at ::pos{0,0,13909484.7964,7394236.0528,-249278.5554} VR: Space station Shop

VR : Orbitonia VR: Spaceboys beach club HQ Space station Orbitonia is a very beautifull building. please visit in VR: Orbitonia (Spaceboys) only me deploy the Orbitonia station. You need to have a large space parking to anchor on it. there is lot of room avalaible under the base for deploy a space elevator 10KT for exemple...

This will make 55 different elements to help you along your way of ship building. This factory has my most updated labeling screens, scripts and every industry is labeled by the Tier of parts or products it makes.! Adjustor XS- x2880 Adjustor S- x720 Adjustor M- x180 Adjustor L- x45 Aileron XS- x360 Aileron S- x90 Aileron M- x22.5 Atmospheric Airbrake S- x720 Atmospheric Airbrake M- x180 Atmospheric Airbrake L- x45 Atmospheric Fuel Tank XS- x720 Atmospheric Fuel Tank S- x180 Atmospheric Fuel Tank M- x45 Atmospheric Fuel Tank L- x11.25 Atmospheric Radar S- x60 Cockpit Controller- x45 Command Seat Controller- x180 Compact Aileron XS- x720 Compact Aileron S- x180 Compact Aileron M- x45 Databank- 2880x Emergency Controller- x320 Gyroscope- x720 Hovercraft Seat Controller- x180 Landing Gear XS- x960 Landing Gear S- x80 Landing Gear M- x20 Landing Gear L- x5 Programming Board- x720 Remote Controller XS- x320 Retro-Rocket Brake S- x720 Retro-Rocket Brake M- x180 Retro-Rocket Brake L- x45 Rocket Fuel Tank XS- x20 Rocket Fuel Tank S- x5 Rocket Fuel Tank M- x1.25 Rocket Fuel Tank L- x0.31 Space Fuel Tank XS- x720 Space Fuel Tank S- x180 Space Fuel Tank M- x45 Space Fuel Tank L- x11.25 Space Radar S- x60 Stabilizer XS- x720 Stabilizer S- x180 Stabilizer M- x45 Stabilizer L- x11.25 Vertical Wing- x1152 Warp Drive L- x1 Wing XS- x720 Wing S- x180 Wing M- x45 Wing Variant M- x45 Wingtip S- x1152 Wingtip M- x1152 Wingtip L- x288 VR: "VO Factory Sales" Discord Name: theOmega28.36#1869 Discord Channel: VO Industries I stand behind all my factories. If you have any issues please reach out to me and i will be more than happy to help resolve any questions or issues you may have. If i do any updates to any factory you already have, i will upodate it at no cost to you. I have a discord for VO Industries that you can join to help keep up with updates and future factories along with support tickets and other factory related topics!

A wall made of 3006 animated lights on a dynamic core to welcome visitors :) You can see it here : ::pos{0,2,-23.9491,-10.5283,119.8070} (Yentico base in front of Alioth Market 13) To visit in VR, search "Light Wall" Peace - YesmanDu974

Are you waiting around standing in the dust or snow for your Mining Units calibration to cycle? For those that want a little bit of luxury while tending you Mining Units, look no further than the new DIA Mining Apartment tower ! Featuring an executive class apartment with 360degree views covering an expansive living area, kitchen and dining, bedroom, bathroom and balcony office, topped off with a personal landing pad - all on top of a self-contained Mining Unit hall and ore collection atrium. The MU hall can accommodate up to 8 MU's and link to a central XL Container accesable from within the apartment via a Hub. Admire the incredible views from the lap of luxury, while your MU's do the work of making you quanta! Come and see the Show Tower on view at the DIA Plaza, with BP's being available from the Showroom adjacent.