Dual Universe Creators

for the script go to https://github.com/Davemane42/DU-Scripts#player-logger-script Log player activity to a Databank(s) and render to a screen v3.2 tested with 1300 entries with 8 databanks will import older data when upgrading (save the data using the 'dump' command just in case) Elements needed: 1x Programming board 1x Manual Switch 1x Screen 1x Detection zone 1 to 8 Databank(s) Instalation: 1. Copy the content of the link below and paste on a programming board lua config https://raw.githubusercontent.com/Davemane42/DU-Scripts/master/PlayerLogger/PlayerLogger.json 2. Connect Detection zone -> Manual Switch -> Programming Board For multiple detection zone: add an "OR operator" (only 1 needed) in between Detection zones and the Manual Switch 3. Programming Board -> Manual Switch (both way) 4. Then do the same for the databank(s) and screen . 5. Finnaly, hit ctrl+L while looking at the board add your username in line 7 of unit.start() rename the location to your liking Activate the board manualy and type "help" in the lua chat for the command list 'clear' [clear the databank(s)] 'dump' [dump the table as JSON in the screen HTML so you can copy it] 'exit' [exit debug mode] 'help' display a list of commands 'remove (indices)' [remove an entry from one of the table] 'update' [Update the screen code]

The original DU Orbital HUD/ButtonsHUD/DimHUD - A full autopilot and HUD suite. It is on stable version 5.453 at current, and no further updates are planned. For a more fully-featured Autopilot/HUD (but potentially less stable), check out ArchHUD https://github.com/Dimencia/DU-Orbital-Hud Support is provided at the Open Source Initiative Discord, dual.sh/osin, in the #tech-support channel

ever wanted a simple screen to control your honeycomb factory? got 1 or 2 or maybe 288 or more! we got you covered! With this script it comes with one DRM Controller on XS core that can be placed anywhere! then with just a few more parts on your own construct and our open source scripts you can control it all! each receiver programming board and control up to 9 honeycomb refineries! you can stack them with our relay controller (simple open source) and run even more! the possibilities are practically endless!!

A visual representation of your ship distance from the warp tunnel between two planets. Fly safe during your missions! It also shows the safe zone, and simulate your ship trajectorys to let you know where you're heading. Script and presentation here : https://github.com/rhoffsch42/DualUniverse-public/tree/master/safe_travel_infos

AR board script for managing and monitoring your mining units Github: https://github.com/DapperDucky/AR-Mining-Unit-Manager Demo Video: https://www.youtube.com/watch?v=T6S5lU59Y_E

All my HUB screen are finally in ONE PLACE! https://www.nexusmods.com/dualuniverse/mods/6/

Free HUD for Dual Universe (PvP/PvE oriented) https://github.com/anatoly-kussul/du-wthud Can also use be used as a flying sript for you haulers. New design is highly inspired by simplicity of Albatross hud Core Features: - Custom auto resists. (Based on last 30 seconds of incoming damage, multiple modes available) - Shield timeline graph - In/Out DPS chart - Disable rotational dampening for smooth rotations (very helpful in pvp to keep optimal tracking) - AR marks of planets, closest pvp border, custom marks and more Atmo Features: - Atmo Burn Limiter (Limits your thrust to not exceed atmo burning speed) - Atmo Reentry Burn Limiter (Automatically shuts down engines and engaging brakes to slow down below burn speed on atmo reentry) - Auto level - Altitude hold

Simple script making your refiners to automatically cycle through t1 recipes when they are out of resources. Helps if you're just starting and have only one refiner or if you want to make your refiner more efficient. Just copy this into your onStatusChanged(3) filter on your refiner (assuming you named that slot "refiner") ``` --- status 3 -> jammed, no materials -- 198782496, -- hematite -> iron -- 2240749601, -- bauxite -> aluminum -- 159858782, -- coal -> carbon -- 2589986891, -- qurtz -> silicon local currentItem = refiner.getOutputs() -- linked list to cycle possible recipes local refinedOres = {} refinedOres[198782496] = 2240749601; refinedOres[2240749601] = 159858782; refinedOres[159858782] = 2589986891; refinedOres[2589986891] = 198782496; refiner.stop(true) refiner.setOutput(refinedOres[currentItem[1].id]) refiner.startRun() ```

PvP Suite includes 4 different scripts at the moment. **Converted to DU v0.30 and to support fully implemented LUA revamp in a future** 1st script: Gunnery seat which includes all weapon, shield, radar and targeting systems. 2nd script: Remote control to make solo PvP possible and includes all navigation ,engine and fuel systems. 3rd script: Utility script for Programming Board, and includes things like Damage report, Periscope, landing lights, automated landing gears and prolly much more useful and useless(but fancy) things in a future.. Also: Cockpit conversion of the whole suite for XS ships, which is only one script. Features: Weapons and targeting: -Weapon Hit Probabilities -Target info when selected (including unique construct id) -Detailed info when target is identified -Compact identified construct list with detailed info -Support for different amount of weapons (1-10) -Transparent non widget Periscope Shield, core and elements: -Shield resist changing is now more simplified, resists will be changed with 2 hotkey presses: For example alt+1 (antimatter) and alt+2 (electro-magnetic) will set resists to 40-40-10-10, alt+1 and alt+1 will set resists to 70-10-10-10. -Feature to put shield on when taking the seat -Feature to put shield offline when leaving the seat (disabled by default) -Automatic shield enabling when entering PvP space -Shield will be put on automatically after venting process -Resist stress values -Shield HP -Core stress -Resist and venting cooldown indicators -Shield offline safety, safety will prevent accidental shield disabling. Safety has LUA parameter and you can also toggle it with hotkeys -Element damage report(on utility script), will list any element on ship with damage Navigation and engines: -Engine control based on tags, ability to shut down and on engine groups, great for fuel saving -Hotkeys ALT + 1-8 will toggle engine groups on/off ALT + 9 will switch all engines on instantly -Brake toggle -V-Booster shutdown when landing -Brake distance indicator -Thrust indicator -Altitude to ground indicator -PvP Zone distance indicator, will show now distance to Safe Zone on any range too when in PvP zone -Fuel tank support up to 6 tanks -Warp Destination with required and remaining warp cell information -Acceleration indicator -Current speed/max speed indicator Other and Interface: -Databank is required to store many settings like engine group status and other settings. -Key G now switch ALT + 1 - 9 hotkeys functions. This means you either use them for Shield resists, Engine control or Other controls. -Indicator to show which side hotkeys are currently assigned for. -Automatic landing gears. Gears will react to altitude to landing pad or whatever, and will extend before the landing, and rectracts when you take off. -Landing lights support, fancy blinking lights if you want! Blink will be faster when you get closer to the ground and will turn lights off after landing is done. -You can hide the build menu -Feature to show ammo container remaining ammos -Feature to show nearest planet/moon atmo/no atmo collision range -General font size modifier LUA parameters -Rename option for engine groups -Rename option for fuel tanks -Parameter for Locked View(straight ahead), Left Alt is Freelook -Parameters for widgets to shown or hide -Parameters for many other features -Parameter to allow or disallow negative throttle value -Parameter to start remote controller with brake toggle on or off -Parameter to disable or enable almost every feature Console commands: /helper on - shows buildhelper /helper off - hides buildhelper Easy installing, just link elements Planned features: -Detailed damage report from enemy hits like what type of damage and how much is absorbed etc. -Friendlies list via transponders -Id converting to letters for easier target calling -Probably much more Selling is now on hold until NQ decides and makes official statement about wipe rumours and what happens on release. There will be individual and org packs and prices also will be decided after possible wipe. If you are interested, join my scripting discord at https://discord.gg/ttajxhZYXY or on my channel @du-creators discord

Screen showing the stats and values of every atmospheric engine in game. A massive upgrade over my old screen showing only large engines. Great for display or shipbuilders. - Multi Page! Just click screen to flip pages. - Hover over the text to see that engines picture. - Now DRM FREE! Copy to your own screens. - Option for screen flipping. --- Discord --- https://discord.gg/KcafbTSwMp --Github Link--- https://github.com/LocuraDU/DU-Locura-Information-Screens --- Buy Locations --- Locura Shipyard @ ( ::pos{0,2,29.8110,107.2521,5.2659} ) --- VR Locations -- View Units: Locura Shipyard -- Other VR Locations -- Locura Exchange Store

Simple screen to add to your dispenser. Lists all basic ship stats and creator info. it is meant for screen size M. grab it here: https://github.com/BartasRS/Dispenser-screen---ship-sale If you like my work tips are welcomed but not required. Enjoy!

for the GitHub, go to https://github.com/Davemane42/DU-Scripts#restricted-access-door-script Restric access to certain zones via "locked door" Elements needed: 1x Programming board 1x Detection zone 1x Screen (minimum) Supports multiple screens Instalation: 1. Copy the content of the link below and paste on a programming board lua config https://raw.githubusercontent.com/Davemane42/DU-Scripts/master/RestrictedAccessDoor/RestrictedAccessDoor1.0.json 2. Connect Detection zone -> Programming Board Then (in no particular order) Programming Board -> Door and Screen(s) 3. Finnaly, edit the lua parameters (Right click -> Advanced -> Edit Lua Parameters) Add your username between the quotes "" "Davemane42" For multiple user. add comma , between names and no spaces "Davemane42,User2,User3"

Essentially, this script provides an AR overlay to your world to view waypoints you have set with Archaegeo's script, in addition to the planets around you. Like all AR scripts made with the AR projection library, there are specific conditions under which this script functions correctly. If you are on a planet, assuming you aren't in a cockpit in another ship, the script should function flawlessly. It will only work in a seat on the construct the programming board was deployed in, and only if you correctly calibrate said seat, assuming you have "freelook" enabled. What freelook enables is a way to track where your camera is looking purely based on your mouse movement. Of course, this comes with one major downside: it won't work in the third person. Nor will it work if you don't calibrate your pitch and heading. Calibration takes place in the form of looking either up or down, pushing your mouse past the limit you can look and then looking either left or right. The accuracy is around 1 degree when looking straight on if the calibration was done properly. (Inaccuracy is purely a result of the mouse capture not being absolutely perfect) In space, as long as you are on the ship the programming board was activated on, it should function for both in a seat, walking around and jetpacking. Note that for walking around, you need to calibrate your pitch. There are a couple more settings to change around if you want to. However, that is about all you need to know. To use the script, copy the JSON file contents found in the link below and select something like "paste Lua script" using a programming board. Connect the programming board to the core, and activate! If you have some saved waypoints using Archaegeo's script, connect the databank to it, and it should load his script's waypoints as well. Link: https://github.com/EasternGamer/AR-Library/blob/experimental/NewWaypointer.json Disclaimer: I coded this, however, Archaegeo provided the idea, hence when starting the script he is credited and used to host the script.

for 10 lights to go from 1 to 10 then 10 to 1 and repeat with a speed setting in lua perams VR: Fordie Industries Location : 11Km from Haven Market 3 DRM Free

Give your favorite ships a touch of class with our DRM free touch screens (as seen on the Eclipse). Backgrounds are PNG since LUA drawings have no graphical editor. I am no LUA expert but the original code was provided by NQ-Deckard who (in my opinion) is! (DU-Forums) Simple LUA editing knowledge is required. Tinker with the values and you will quickly understand what is going on. It should be noted that "--" uncomments a line. Thanks to Suppe and his instructions in the screen code. Simple to deploy as you can omit the forcefields (the only T3 elements in the blueprint). All code is updated for LUA revamp. 09.2022 Have fun and LUA-fy your ships! VR: Hadron HQ Alioth