Dual Universe Creators

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

The Dune Dwellers of Haven have perfected harvesting the planets resources with their specialized Mining Silo's. Designed with a Basic Container M & 4x Mining Unit L's, this resource facility can store up to 7 days worth of resources for a single weekly haul. Over 80kL of ore storage! Calibration can be done via the platform deck in RPG style, or for those seeking efficiency through the bottom where the ore will calibrated ore will spawn. Looking up from the bottom you can see the machinery in action as it chews up the ore being extracted from the dunes below. (Tokens will not be made available) Featured by: - Landmark Explorer Twitch Channel

50% off blueprint price at the moment on dispenser NEW LOCATION FOR FULL RELEASE ::pos{0,2,35.9865,105.7206,-47.7959} FEW TILES AWAY FROM MARKET 6 This is a double landing pad with 2 xs core size garages with plenty to space to add a factory or office space with viewing balcony, perfect for any outpost you can view at the location written on the right of the screen or view in VR search for loaded industries

S Core Storage building Clean up your tile. Place Containers or a small factory inside Pb Requires 1 Sliding door M 1 Vertical light L You can replace concert with brick for almost same effect Location: ::pos{0,2,15.0650,96.8392,0.0000}

Thank you to everyone who was interested in this project. This has been sold to Fyrestrider. Please reach out to him in-game with any questions. This was sold as a one-time piece, DRM-Free Core BP and token. I do not have the ability to make another, only Fyrestrider does. Perso is a shore-based fixed mining platform. Originally designed for The Wendence Bauxite Meganode on Feli by the now-defunct Cracker Barrel Org. Construction started 12478 and completed early 12482, it reached peak production in 12490. Decommissioned in 12501 and transported via VTOL to its current position at Satrion Corporation's Feli Restoration Plant. ::pos{0,5,10.4711,-153.5337,18431.2520} Surrogate VR - Perso The restoration of Perso has seen multiple setbacks. Lack of interest and funds to restore the mining relic has led Satrion Corp [RION] Board of Directors to fund simple upgrades, such as auto-mining units, fuel refining, and a converted second-floor executive lounge for ore production and repair parts. Other restorations include all new lights throughout, upgraded safety barriers for NQSHA compliance, as well as all-new gas-filled windows in all areas for a comfortable mining experience. "We believe the current upgrades will more than suffice for today's demanding mining needs." Said Armand Reed, CEO and head of product development at Satrion Corp. Both lower-level and rooftop cranes are non-functioning. Stairs from first-floor offices to the second-floor executive lounge have been removed, as well as stairs to rooftop access. Elevators have been retrofitted in these areas for more dynamic access to second-floor ore refining and rooftop storage. Ground level access to fuel refining with large amounts of Nitron storage. Detection zones to auto open and close doors. A force field to the executive lounge catwalk to ensure pressurization allowing this rig to be transported to moons for non-atmospheric applications. All new electrical for the upgraded areas. Fully compliant with the current Novean Institute of Standards. All concrete sub straights have passed all inspections for compressive strength. All metal girders have received full restoration and a fresh coat of Rooster Red Paint from the Sinnen Paint Company. (Certification Available upon request) Note: This was not designed for habitation. Does not include bathroom facilities or sleeping quarters. Please check system-wide and local planetary authorities before converting for such uses. Any unauthorized conversions will be at the new owner's full expenses and liabilities. Satrion Corp [RION] is not liable for any future fines. Check with your local authorities. Features: Five Auto-Mining Units (With equipped hyperdiamond core-bits, Non-Cason Compliant) Five ore refinery stations. (Room for more, electrical not included) One Nitron Refining. One X4 Refining. (Compatible for X1, X2, X3 - Tank scrubbing required for fuel type change) All New LIghts All New Windows Upgrade pressurized doors and locks. Safety barriers installed Emergency Exit ladders have been installed. Redecking of the rooftop landing pad (NQSHA Compliant Lighting added) Satrion Corp [RION] is selling Perso as-is and does not include any warranty. It will be a DRM-free one-of-a-kind token. We will hand out our only Core Blueprint as well as the tokenized construct at the time of sale. It is recommended a certified NQSHA inspection is complete before attempted use of any lower-level or rooftop crane. You will need to make arrangements with a rigging company of your choice if you do not have the means to transport this yourself. ((This is a one-of-a-kind piece. I will not replicate this after this piece sells. I am also not keeping a copy of any blueprint or core blueprint after the sale. It will be the only one in existence unless you decide to make more blueprints))

A platform which houses space for up to 8 mining units, 2 EXT-XL + 2 L containers, a landing platform and solid industrial looks...all this in an easily deployable mining platform M-core. The smartest way to tap into the potential of those mineral-rich hexes is by deploying this handy platform on them and letting those sweet mining units work on making you rich. How To Buy: - Contact me on discord: taishiryu#6188

VR "VO Factory Sales" This will make all you Basic Engine needs!! 24 Hour production with no industry talents Basic Atmospheric Engine XS - x 720 Basic Atmospheric Engine S - x 180 Basic Atmospheric Engine M - x 45 Basic Atmospheric Engine L - x 11.25 Basic Space Engine XS - x 720 Basic Space Engine S - x 180 Basic Space Engine M - x 45 Basic Space Engine L - x 11.25 Basic Space Engine XL - x 5.6 Basic Hover Engine S - x 720 Basic Hover Engine M - x 180 Basic Hover Engine L - x 45 Basic Flat Hover Engine L - x 45 Basic Vertical Booster XS - x 2880 Basic Vertical Booster S - x 720 Basic Vertical Booster M - x 180 Basic Vertical Booster L - x 45

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

A passion project of mine. I will not deploy this on live but I do have a core BP and can distribute it if anyone wants one.

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.