Dual Universe Creators

This is a small core starter warp cell factory designed mainly for personal use production of warp cells. All industry is labeled via screens for easy startup. Pre installed with Indy Hud by Codeinfused. Current setup will make 2 warp cells every 50mins with no talents. This can be increased easily by adding more glass furnaces for the warp cells and increasing the output of a few of the electronics machines. Industry placement talents will also increase speed of output. All industry units are labeled. You can view it by VR at Phoenix Corporation Location ::pos{0,2,47.8459,114.4380,62.5178}

A mining rig with style - instead of floating mining units everywhere. Space for eight mining units + L container. Mining unit output accessible via elevator to basement area. Mining units not included in BP - place them separately. VR: Deeh Store (dispenser inside the building, 2nd floor next to elevator; turn left when entering 2nd floor via stairs) If you have questions, don't be shy - contact me on Discord!

Warp Cell Cube Design inspired by the famous Mario Bros Warp Cube, this XS Core is packed to the bone with industrial machines and design to have a production capacity of 520 warp cells per day, needing only to feed with the 10 ores required for warp cell production, Pure Hydrogen and the 6 schematics needed for warp cell production. Features: - Capacity: 520 warp cells per day with moderate T1/T2 production talents - Feeds from Ores and Hydrogen, so no need for additional machines (refiners e.g.) - Easy setup: when powered on, all machines will be calibrated to produce the right amount of intermediate products to feed into the 16 Glass furnaces for Warp Cell production - Easy maintenance: elaborate monitoring screen, showing the status of each (sub)assembly being produced as well as the inventory levels of the Ores, blueprints and Hydrogen. - Token available on request, please do expect some time needed for the production of the machines - Support during setup on request (although should work straight from the box) No more need for giant setups for warp cell manufacturing! This XS core is probably all you need for your personal warp cell needs! Location for watching the cube in action: ::pos{0,2,7.7358,80.4968,220.3335} visitable in VR though: Warp Cell Cube Demo

2B Designs Hangar L Core Size Hangar - Plenty of Workspace - Large Storage Room - Large Room for Small Factory / Honeycomb Factory - Good Size Landing pad - Elevator / Hole Access to floor for easy access. - Lot of voxel work (Top Floor is clear so you can do whatever you like with the area, Personally mine I added a honeycomb factory so I can make whatever voxels I need when building) VR: "2B Hangar 2B01 Display" For a display of the Hangar Sold at 2B Designs Building or Display location ::pos{0,2,45.0738,96.5919,173.6963} Discord: 2BITTER#7729

Hadron L Factory Hadron proudly presents our first L core factory template in our signature voxel style. 2 years and 6 iterations later, our factory core has been optimized to incorporate a clever container bus system for easy manufacturing. The bus system uses a “master container > transfer unit > bus container” format and was designed in such a way, that by using S Containers on the outer edges of the core, all products and parts (eg. steel, hydraulics, frames) can be distributed to all floors that require them for further production. This method of distribution was intended to support industry for every craftable in the game and requires the minimal amount of effort to do so. The factory has no voxel walls as it is intended for 4 additional L core shells (joining up at the center of the factory core) to make up the voxel surround. It has been designed this way to reduce lag on the central factory core itself by allowing for you to create your own voxel shell around the factory on these outer “shell cores”. This allows for additional storage or industry to be added to the free space in these shell cores. Container Hubs placed on these outer shell cores can be moved to the central monitor walls, keeping them separate from the main factory itself, allowing easy access to them from the center of the main factory core. Layout Ground Floor - Refining and Pure Products The ground floor comes with a central console for accessing multiple Container Hubs and has 8 Mining Unit holders for on site harvesting of Ore. The Ore is then fed to a series of Refiners and from there, the Pure material gets fed to Smelters, Chemical Industries, Glass Furnaces or Recyclers for conversion into Products or made into Scrap/Fuel. 1st Floor - Intermediary Parts and Complex Parts The 1st floor uses the bus system to receive the Products from the floor below and has been arranged to support the production of all Intermediary Part and Complex Parts. These Parts are then fed back to the bus for distribution to the floors above. 2nd Floor - Structural Parts and Functional Parts The 2nd floor uses the bus system to receive all Products, Intermediary Parts and Complex Parts from the floors below. This floor has been arranged to support the remaining Structural Parts and Functional Parts production, completing the entirety of the games most common Parts for distribution via the bus system to the remaining 2 floors. 3rd Floor Exceptional Parts and Warp Cells The 3rd floor is intended for production of Exceptional Parts. These are specialized parts for use in high tier production and are mostly optional. We advise using this floor for the production of Warp Cells as Exceptional Parts are a key ingredient for those and various other end game items. The floor can however also be used the same as the 4th floor to house Assembly Lines for the production of anything else you choose. 4th Floor - Assembly Lines for Finished Products and Storage The final floor is a blank slate for your production needs. It has been designed so the bus system can deliver all Products and Parts (created on the floors below) to Assembly Lines of your choice. This allows for easy expansion and linking from the bus Containers (now on all 4 sides of the core) to your choice of Assemblers. For any questions about the bus system or functionality of the factory , please contact RyanPryde on Discord or visit Hadron HQ for an in-depth explanation and further resources to help you understand and utilize your new factory! The layout is similar to the M Factory ! so take an look at our video tour: https://www.youtube.com/watch?v=BJXpXqc4MaI Visit us in VR: Hadron HQ

In the process of moving, blueprints are available to Kosmos Exchange. Next up in modular factories is Czars Space Fuel Factory. Making Nitron and up to 2 styles of Kergon. Add it onto one of my Space BigLandyPaddys for full autonomy in space. Command center with Jerichos Storage LUA and My Hub screens. See it in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42006.4114,202236.9961,33625.3975}

In the middle of a move, contact me via discord to arrange a sale. You don't want to do boring voxel landing pads, class it up with Czar! Freshly landed from space and custom made for L Static cores. Lots of storage inside, plenty of parking. Elevated giving it a good look and easy to place. Easy to add additional pads too....alignment is a breeze with included connection points to make it easy peasy. Elevator pad on the bottom is included but by default is not on the ground allowing you to place it perfectly on the ground without any weird gaps See it in VR at "Czars Ship Spot" Dispensers set up.

Thank you to everyone who was interested in this project. This has been sold to Fyrestrider. Please reach out to him in-game with any questions. This was sold as a one-time piece, DRM-Free Core BP and token. I do not have the ability to make another, only Fyrestrider does. Perso is a shore-based fixed mining platform. Originally designed for The Wendence Bauxite Meganode on Feli by the now-defunct Cracker Barrel Org. Construction started 12478 and completed early 12482, it reached peak production in 12490. Decommissioned in 12501 and transported via VTOL to its current position at Satrion Corporation's Feli Restoration Plant. ::pos{0,5,10.4711,-153.5337,18431.2520} Surrogate VR - Perso The restoration of Perso has seen multiple setbacks. Lack of interest and funds to restore the mining relic has led Satrion Corp [RION] Board of Directors to fund simple upgrades, such as auto-mining units, fuel refining, and a converted second-floor executive lounge for ore production and repair parts. Other restorations include all new lights throughout, upgraded safety barriers for NQSHA compliance, as well as all-new gas-filled windows in all areas for a comfortable mining experience. "We believe the current upgrades will more than suffice for today's demanding mining needs." Said Armand Reed, CEO and head of product development at Satrion Corp. Both lower-level and rooftop cranes are non-functioning. Stairs from first-floor offices to the second-floor executive lounge have been removed, as well as stairs to rooftop access. Elevators have been retrofitted in these areas for more dynamic access to second-floor ore refining and rooftop storage. Ground level access to fuel refining with large amounts of Nitron storage. Detection zones to auto open and close doors. A force field to the executive lounge catwalk to ensure pressurization allowing this rig to be transported to moons for non-atmospheric applications. All new electrical for the upgraded areas. Fully compliant with the current Novean Institute of Standards. All concrete sub straights have passed all inspections for compressive strength. All metal girders have received full restoration and a fresh coat of Rooster Red Paint from the Sinnen Paint Company. (Certification Available upon request) Note: This was not designed for habitation. Does not include bathroom facilities or sleeping quarters. Please check system-wide and local planetary authorities before converting for such uses. Any unauthorized conversions will be at the new owner's full expenses and liabilities. Satrion Corp [RION] is not liable for any future fines. Check with your local authorities. Features: Five Auto-Mining Units (With equipped hyperdiamond core-bits, Non-Cason Compliant) Five ore refinery stations. (Room for more, electrical not included) One Nitron Refining. One X4 Refining. (Compatible for X1, X2, X3 - Tank scrubbing required for fuel type change) All New LIghts All New Windows Upgrade pressurized doors and locks. Safety barriers installed Emergency Exit ladders have been installed. Redecking of the rooftop landing pad (NQSHA Compliant Lighting added) Satrion Corp [RION] is selling Perso as-is and does not include any warranty. It will be a DRM-free one-of-a-kind token. We will hand out our only Core Blueprint as well as the tokenized construct at the time of sale. It is recommended a certified NQSHA inspection is complete before attempted use of any lower-level or rooftop crane. You will need to make arrangements with a rigging company of your choice if you do not have the means to transport this yourself. ((This is a one-of-a-kind piece. I will not replicate this after this piece sells. I am also not keeping a copy of any blueprint or core blueprint after the sale. It will be the only one in existence unless you decide to make more blueprints))

Ikara Industries presents the "Ikara Factory M1" - Elemetns and Script Rework. Produce and rest, then the Ikara Factory M1 is for you. The M core includes - 5 floors for space up to XL machines - 1 basement with the possibility to integrate up to 84 L containers - 1 factory control center with 4 L screen - Door script (RestrictedAccessDoor) provided by Davemane42 - Light Control (ScreenLightControl) script provided by DU_ASTco - Screen Script to set Text to the Lounge and Entry Screen - Large window front - 2 lounges with benches and snack machines. When the production takes longer. - 15 L screens with the Entropy Effect to chill on the top. What else you should know: - Building has DRM - All screens must be turned on once manually. VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

We proudly present our first static entry under Prometheus first fire. Made by Vorkan and DotHack, this space station is built on a L space core and has all the accommodations you need to live into space and do all your activities. It also has a lot of space under the large landing pad to suit your factory needs and expand as you like. You want to relax after some asteroid expedition or any PvE/PvP adventures? Go take a breather in your personal sky bar that will surely give you the best view. Comes with: 1 L landing platform 4 S landing platforms 1 fuel factory 1 maintenance unit 1 DSAT 8 Expanded XXL containers as main cargo (plenty of place to put more) 4 L containers for the fuel factory all the factory elements needed for the functioning of the fuel factory All elements included in the BP. BPs available to buy in several locations: ADMI build store VR: ADMI build store (go to the Prometheus first fire floor at the top of the structure) Coordinates - ::pos{0,2,-24.6842,16.8702,151.5735} Paragon Hex showroom VR: Paragon Hex Showroom Coordinates - ::pos{0,2,35.3441,107.0564,-13.1840} Vega Industries (coming soon) VR: Vega Showroom Coordinates - ::pos{0,2,-22.4597,13.9911,-0.0001} For any questions, contact vork on discord

In the process of moving, blueprints are available to Kosmos Exchange. New Awesomesauce space station. L core with 1 L core size landing surface and 4 M core landing surfaces below. Small control center in the middle along with walking surfaces that can connect to other cores or remove them if not needed. Tons of storage/indy space available under each pad. Hundreds of container L's fit. I put an ammo factory in one and there's so much extra space available. Come check it out in VR at "Czar In Space" or in person at my station located conveniently 132km above Alioth Mkt 6 ::pos{0,0,-42004.9319,202233.7259,33629.9593} There are 2 walkway styles, please make sure to get the proper on for your application. The old style has a rounded hand rail, the new style matches all of my new structures. The old style dispenser is marked. Standard oopsie policy. I underrstand placing static and space cores can sometimes lead to misplacements/misalignments and whatnot. Not to fear, I'm happy to help you out. If you find yourself in this situation, please contact me for a replacement blueprint. I will need to verify that the core was deployed and that it was then disassembled. I'll also charge you for the blueprint creation fee.