Dual Universe Creators

Dry Dock LC-01 L Core At the Exchange in the Red section or At ::pos{0,2,41.0164,107.5123,75.1163} Inspired By : Loaded , Ody, My Building Heroes :) More Comming Soon!

Ikara Industries presents the "Ikara Landing Pad KIT T2 (DRM Free)". The larger version of the Landing Pad KIT T1, with the possibility to integrate containers. The landing pad kit contains - DRM-free - Stairs to the landing pad and to the storage room - 2 different layouts - Recess for two screens - Different layouts available (e.g. door panels) Placement rules: Hold SHIFT when placing the modules. What else you should know: Examples: Building an S Core version 4 x corner modules (63 voxels each) Building an M core version (one side) - 2 x corner modules, 2 stair modules (4 voxels remain, move the panels 2 voxels inward and in each direction). - The M version can hold up to 48 L containers VR: Ikara Industries or Ikara Industries Exchange Where to buy ? Ikara Industries or Ikara Industries Exchange (on the Alioth Exchange Yellow Hall) Questions? - Message @Ikara2184#2629 on discord.

VR: "VO Factory Sales" This will make 14 Uncommon Mining Units in 24 hours with no indy talents. Easy to set up as everything is labeled!! Check it out in VR or come by HQ!!

Thank you to everyone who was interested in this project. This has been sold to Fyrestrider. Please reach out to him in-game with any questions. This was sold as a one-time piece, DRM-Free Core BP and token. I do not have the ability to make another, only Fyrestrider does. Perso is a shore-based fixed mining platform. Originally designed for The Wendence Bauxite Meganode on Feli by the now-defunct Cracker Barrel Org. Construction started 12478 and completed early 12482, it reached peak production in 12490. Decommissioned in 12501 and transported via VTOL to its current position at Satrion Corporation's Feli Restoration Plant. ::pos{0,5,10.4711,-153.5337,18431.2520} Surrogate VR - Perso The restoration of Perso has seen multiple setbacks. Lack of interest and funds to restore the mining relic has led Satrion Corp [RION] Board of Directors to fund simple upgrades, such as auto-mining units, fuel refining, and a converted second-floor executive lounge for ore production and repair parts. Other restorations include all new lights throughout, upgraded safety barriers for NQSHA compliance, as well as all-new gas-filled windows in all areas for a comfortable mining experience. "We believe the current upgrades will more than suffice for today's demanding mining needs." Said Armand Reed, CEO and head of product development at Satrion Corp. Both lower-level and rooftop cranes are non-functioning. Stairs from first-floor offices to the second-floor executive lounge have been removed, as well as stairs to rooftop access. Elevators have been retrofitted in these areas for more dynamic access to second-floor ore refining and rooftop storage. Ground level access to fuel refining with large amounts of Nitron storage. Detection zones to auto open and close doors. A force field to the executive lounge catwalk to ensure pressurization allowing this rig to be transported to moons for non-atmospheric applications. All new electrical for the upgraded areas. Fully compliant with the current Novean Institute of Standards. All concrete sub straights have passed all inspections for compressive strength. All metal girders have received full restoration and a fresh coat of Rooster Red Paint from the Sinnen Paint Company. (Certification Available upon request) Note: This was not designed for habitation. Does not include bathroom facilities or sleeping quarters. Please check system-wide and local planetary authorities before converting for such uses. Any unauthorized conversions will be at the new owner's full expenses and liabilities. Satrion Corp [RION] is not liable for any future fines. Check with your local authorities. Features: Five Auto-Mining Units (With equipped hyperdiamond core-bits, Non-Cason Compliant) Five ore refinery stations. (Room for more, electrical not included) One Nitron Refining. One X4 Refining. (Compatible for X1, X2, X3 - Tank scrubbing required for fuel type change) All New LIghts All New Windows Upgrade pressurized doors and locks. Safety barriers installed Emergency Exit ladders have been installed. Redecking of the rooftop landing pad (NQSHA Compliant Lighting added) Satrion Corp [RION] is selling Perso as-is and does not include any warranty. It will be a DRM-free one-of-a-kind token. We will hand out our only Core Blueprint as well as the tokenized construct at the time of sale. It is recommended a certified NQSHA inspection is complete before attempted use of any lower-level or rooftop crane. You will need to make arrangements with a rigging company of your choice if you do not have the means to transport this yourself. ((This is a one-of-a-kind piece. I will not replicate this after this piece sells. I am also not keeping a copy of any blueprint or core blueprint after the sale. It will be the only one in existence unless you decide to make more blueprints))

THE MONOLITH During ground works for our base, we have unearthened a strange artifact of possible alien orign. None of our instruments was able to penetrate this object or to get any data. You can see it first-hand, when VRing to "Tropico". We decided, to make this artifact available to you all, in hope that your technologies can retrieve the deep secrets it bears within. INSTRUCTIONS The dispenseris on location, as part of the excavation site. There are two blueprints - one for the monolith (MON) and one for the excavation site (SIT). At your own location, find an area that is as flat as possible. If there are small elevations, the center of SIT should be at the lowest area. Sink it into the ground, but make sure that somewhere a little bit of the upper wall remains above ground. Look how it is done at our location. After it has been placed, use your digging tool (2) to create a small tunnel downwards, along a wall. Each wall contains 5 sections, one above each other. Stop the tunnel when you have reached the lowest of those 5 sections. Now use tool 5 to create a flat floor inside the four walls. Then remove the soil that is still above your head inside the walls, avoid removing soil outside the walls. Use now the Smooth Voxel tool along the walls to raise the floor unevenly along the wals, especially at the four corners. Do some landscaping to make the floor a bit uneven. Important: you must not see any of the steel honeycombs. Do not yet create the small "hill" in the center. Now place the MON slightly above the floor. Now create the small "hill" below it to hide the core. Finally, do some additional work on the surrounding area, to make it looking perfect. When you're done, post "My god, it's full of stars" in the general ingame chat! :-D HURRY, THERE ARE ONLY 10 BLUEPRINTS!

50% off blueprint price at the moment on dispenser This showroom kit will allow you to build any size showroom you wish to house as many ships as you like, its very easy to do just like the hangar kit, its panels are also same size as the hangar kit so you can even easily decorate the outside walls of your hangar with this kit or even be creative and mix and match, everything you see in the pictures of these buildings are in this kit the only thing you have to do is fill the empty space on roof and make your own link from the balcony curve which is all very easy, also comes with a detailed floor panel 50 x 50 voxles in size for very easy placement which you can use in any of your other buildings you may own. you can with a bit of time change the mats of all the panels to suit your colour of choice endless possibility, you will also find what i call end caps to finish off parts that are left open from your build can view in VR search loaded industries showroom any questions please dm me on discord loaded#2378

DPS Hexa Pads - showroom and parking pads with a diamond plate structure. Static XS BPs (DRM) with different patterns, prices vary depending on the complexity (1,000,000 to 2,500,000). IMPERIAL CREST special edition available - for all fans of a well-known scifi franchise! VR: Deeh Store (dispenser + preview -> basement) If you have questions, don't be shy - contact me on Discord!

The CCU Crane Set. Do u need a crane for your heavy lifting jobs? Then CCU has a very nice and modular crane for u. This heavy duty crane will make any lifting a piece of cake. It has a turning radius of 0 ( cause DU dos not allow us to ) It can lift up to any amount ( tested at 100KT ) Cable length - as long as u can make it. ( keep it responsible ) Get your crane today ! U can visit us in VR at - CCU Voxel library Or in person at our location - ::pos{0,2,34.7581,72.5932,-0.0001} (Alioth) Fun intended. But have a great day Novean ! P.S. To be able to use a heavy duty crane u need a special permit and license. It is not possible to hire a specialist crane operator.

M core with landing area on top Identical to the other M landing pad module but without interiors (uses less honeycombs) 4 corridors to connect other modules / space elevator can be seen on VR: Aerogics Space Station *** Honeycombs *** Black Pattern Aluminium & Polished White Aluminium: metal exteriors Galvanized Black Iron & Glossy Light Gray Platic: interiors Galvanized Light Beige Steel: pipes Glossy Purple Plastic: replace with color of your choice when customizing 3.5k alu 700 plastic 200 iron 100 carbon fiber / steel

Marina Walkway Set Walkways with handles: - straight - 22.5° - 45° Stairs 45° (Z-axis) Industrial Pillar with attachment for the Walkways drm free VR: "Alioth Marina"

putting big L core stations together is fine but when you want to break up the monotony, give this connector module a whirl. Still an L core but a little smaller to add some depth to your modular stations. Features a nice throughfare windowed walkway to transit between cores and also look out over the 10 XS sized landing pads. Check it out in VR at "Czar in Space Showroom" or in person here ::pos{0,0,-42319.9264,202282.6245,33492.4846}